Accessories (4 of 4)

Maxx Products International, LLC.	http://www.maxxprod.com
	Accessories 4 of 4

Accessories

Servo Driver

Power Panel

MX 8340 Servo Driver	$25.95
This handy servo driver allows you to operate your servo or ESC without turning on your Tx. Great for workbench set up or field set up when Tx is impounded.

V-Tail Mixer

Power Panel

MX 9310 V-Tail Mixer	$14.99
This V-Tail Mixer is a must when flying a delta wing or V-tail airplane with a transmitter that has no mixing function. It works with any PPM (FM) and PCM systems

Servo Mounting Hardware

servoscrews.jpg (4961 bytes)

ACC169 Servo Mounting Hardware	$4.25
This 12 pcs each of mounting screw, brass sleeves, & rubber grommets. Fits Futaba, Hitec, RCD, JR, MPI, FMA, Cirrus, ACE, and Tower servos.

Strobe System

ACC249 Single Strobe System	$28.00
ACC248 Dual Strobe System	$35.00
ACC246 Spare Strobe with Plug	$10.00
High intensity horse-shoe strobe lights are connected to a control board with regular JR type connectors. Strobes can be easily extended to any location by using regular JR type extension. Operating voltage range from 4.8V. Visible from hundreds of feet away, a must for night flight. Blinking rate is adjustable!

Curved Lexan Scissors

ACC147 Curved Lexan Scissors	$5.00
Stainless stell curved scissors for cutting ABS cowls, plastic canopies, Lexan car and helicopter bodies.

Knife Edge Body Reamer

ACC639 Knife Edge Body Reamer

Battery Pack Construction Parts

ACC801 "Sub-C" Cell End Cap set	$1.00
ACC811 "Sub-C" Cell Insulation Ring, 20pcs	$2.00
ACC812 "A" Cell Insulation Ring, 20 pcs	$2.00
ACC813 "A" End Cap Set	$1.00
Large & Small Heat Shrink Tubings
Small Tubings - 1 yard per piece, black Flexible heat-shrinkable polyolefin insulating tubings perfect for insulating spliced wires. Will reduce to half of the initial size when heated by a heat gun. A must for all electric works. Dimensions shown here are flat diameters.
HST564 5/64" dia, for single wire	$1.00
HST964 9/64" dia, for 2-3 wires	$1.00
HST120 1/2" dia, for cables or PC boards	$2.00
HST732 7/32" dia, for AWG 12 wires	$1.00
HST125 1.25" for A cells	$1.00
HST100 1.00" for AA cells	$1.00

Large Tubings - by the foot, yellow unless indicated, some clear This is the type of heat-shrink tubings for making battery packs or closing boards. Will shrink to half of the initial size when heated by a heat gun. Dimensions shown here are flat diameters.
HST150Y 1.50" for Sub C cells	$1.00
HST150C 1.50" for Sub C cells, Clear	$1.00
HST175 1.75" for C cells & 1/2 AA pks	$1.00
HST200 2.00"	$1.00
HST220Y 2.20" for AA square packs	$1.00
HST220C 2.20" for AA square packs, Clear	$1.00
HST265Y 2.65" for A, AA, SC flat pks	$1.00
HST265C 2.65" for A, AA, SC flat pks, Clear	$1.00
HST300 3.00" for C size flat packs	$1.50
HST350 3.50" for D size flat packs	$1.50
HST400 4.00"	$1.50
HST450 4.50"	$1.50
HST500 5.00"	$1.50