|
NEW!!!
Miracle Switch MK2 |
|
NO MORE
CRASHES DUE TO SWITCH FAILURE!
|
|
ACC405 Miracle Switch MK2 |
|
|
|
This electronic Miracle Switch replaces
the regular mechanical switch and includes a built in voltage regulator.
Under normal condition, the switch functions like a regular switch.
However, when the switch or its wires fail, the current continues to
flow. The only way to turn it off under this condition is to
disconnect the Rx battery pack.
- Large heat sink for optimum
performance
- Soft-mount Charge Switch can be
relocated with a regular extension
- Dual HD AWG22 input/output
connectors to double current capacity and redundancy
- Built-in regulator is factory
preset to 5.95V output, fully adjustable between 5V to 6.5V
- When input is higher than 6V or
any set voltage, it will regulate to 6V or any set voltage
- When input drop below set voltage,
regulator is bypassed, • Weight only 1.7 oz, • Idle Current:
0.03 ma max
- Current: At 7.4V input, 10Amp
continuous, 20Amp max for 1 minutes
- Input Range: 4.8V -12V
Note: Current capacity drops as input voltage increases
|
|
Miracle Switch ( 5.4V output) |
|
NO MORE
CRASHES DUE TO SWITCH FAILURE!
|
|
ACC409 Universal Connector |
|
|
|
This electronic Miracle Switch replaces
the regular mechanical switch and includes a built in 5.4V
regulator. Under normal condition, the switch functions like a
regular switch. However, when the switch or its wires fail,
the current continues to flow. the only way to turn it off
under this condition is to disconnect the Rx battery
pack.
- Built in
6V regulator,
- Input
voltage: 4V - 8.4V,
- Output
Voltage: 5.4V,
- Current:
up to 6 Amp continuous with 5-cell nicad/nimh packs
- Idle
Current: 10ma max,
- Weight
only 1.0oz
- Universal
Connector Available
for Futaba, Hitec/JR, Air. Z
|
|
NEW!!!
Voltage Regulator MK3 |
|
|
|
ACC135 Voltage Regulator MK3 |
|
|
- Large heat sink for optimum
performance
- Dual HD AWG22 input/ouput
connectors to double current capacity and redundancy
- Output is factory preset to 5.95V,
fully adjustable between 5V to 6.5V
- When input is higher than 6V
or any set voltage, it will regulate to 6V or any set voltage
- When input drop below set
voltage, regulator is bypassed
- Weight only 1.4 oz
- Current: At 7.4V input, 10Amp
continuous, 20Amp max for 1 minutes
- Input Range: 4.8V -12V
Note: Current capacity drops as input voltage increases
|
|
6-Volt Regulators
|
|
|
|
5-cell Rx pack offers many advantages. It is the easiest
system upgrade that makes servos run faster with torque. It also
provides extra safety margin. When one-cell fails, you still have 4-cell
for safe operation. However, a freshly charged pack may cause
some jittering. Here is the turnkey solution.
ACC139 Key Features: • When input is higher than 5.4V, it will
regulate output to 5.4V, • When input is less than 5.4V, regulator
is bypassed, • Weight only 0.4 oz, • Current: 5 Amp
continuous,10 Amp peak @7.2V input, • Input Range: 4V -8.4V.
|
|
ACC139 5.4-Volt Regulator |
|
|
|
|
ACC234 Key Features: • Adjustable output voltage, • Large heat sink
for optimum performance, • Weight only 1.4 oz, • Current: 15
Amp continuous, 30 Amp peak @7.4V input. • Output voltage
range: 4.8-16V. Input voltage must be at least 1V higher than output.
Note: Current capacity drops as input voltage increases.
|
|
ACC234 Adjustable HD Regulator |
|
|
|
|
| One-Touch Smart Tachometer |
|
|
ACC199 One-Touch
Smart Tachometer |
|
- One-Touch Design for 2, 3, and 4
blades,
- Sealed
switch and lens protected sensor,
- RPM: 10 ~
99,990, 10rpm resolution
- Voltage:
3Vdc, battery included
- Compact
design, 3.3"x2.4"x0.83", 2 oz
|
|
Dean's
Ultra Battery Harness
|
|
NEW!
|
6942 Dean's
Ultra 2P Battery Harness
Use 2 packs in parallel to increase
current and durations
|
|
6952 Dean's
Ultra 2S Battery Harness
Use 2 packs in series to increase
total voltage
|
|
6953 Dean's
Ultra 3S Battery Harness
Use 3 packs in series to increase
total voltage
|
|
|
6932
Dean's Ultra Y-Harness
Connects 2 ESCs to one
battery pack
|
|
|
|
|
Arming
Switch
|
|
|
6970
Arming Switch, with Ultra Dean Plugs |
|
|
6980
Arming Switch, with Power Poles |
|
|
6970-1
Spare
Plastic Case for Arming Switch |
|
|
6970-2
Spare
Arming Plug for Arming Switch |
|
| A
must for large scale electric airplanes. Simply install the
receptacle to the fuselage side and connect the battery and ESC.
Plug or unplug the connector key to turn the power on and off.
6970 comes with Ultra Dean connectors and 6980 comes with Power
Pole connectors.
|
